Kenyon and I both had business trips to Utah the last week of July, so we spent about 24 hours working on the cabin on August 1. When we left in June we were feeling really good about what we had accomplished. So, we actually didn't have too much to get done for this trip. We had about 2/3 of one row of chinking left on the outside and one gable end needed to be painted. There's still plenty to do, but those were the only things that we needed to get done and the other things the contractor can work on.
We were able to accomplish everything and even have enough time to get things cleaned up and not be rushing out of there in the dark! Where it stands now, all exterior chinking is complete. The contractor needs to finish the "bird blocks" between the top log and roof and the house will be completely weathered in.
Kenyon painting the gable end
Just pictures of where we left everything!
About Me
- Mumford
- We are building our own log home in Utah following the methods of the Log Home Builders Association (LHBA). After a lot of research we really felt that LHBA was the best way to go. We highly encourage you to visit the LHBA website at www.loghomebuilders.org. It seems crazy to think we can do this ourselves, but LHBA really makes you a believer! And remember, we welcome any help!
Tuesday, August 18, 2015
Thursday, June 25, 2015
June 2015
Kenyon and I traveled to Utah for 8 days in June. I am proud to say that for the first time ever, we actually got more done than we thought we would! We were very fortunate to not have any serious weather issues and to have no other issues (cabin or RV-related) that came up. It probably also helped to have left kids at home!
Before we got there, our neighbor/contractor framed both gable ends and put all the siding up on the "road" wall gable end. Due to the extreme height, he was not going to be able to do the siding on the "valley/downhill" wall gable end. So, the plan was for Kenyon to work on that (with him) while we were out there. We would rent a forklift and we wanted to get everything done on that gable end to avoid having to rent the forklift again and we weren't sure if we would be able to get back out this summer or not. One thing we learned (unfortunately from experience) is that you cannot count on being able to use the forklift in the fall, winter, or spring because the ground can be too wet!
Items finished before we got there:
Road/Uphill gable end completed, with the exception of paint. The siding will get painted a color similar to the logs.
Road/Uphill gable end completed - view from our new neighbor's house on the other side of the cul-de-sac.
All 1st floor framing -
View of great room from front door.
View of what will be stairs/bathroom wall from front door.
View of master bedroom doorway from front door.
View of kitchen from great room/dining area
View of 1/2 bathroom and laundry room from great room
Look back at master bedroom from great room
Goals
The goals for what we would get done was to complete the downhill gable end, chink all of the corners (on the outside), chink the downhill wall (on the outside), and if possible there were 6 partial rows on the other walls left to chink on a couple different sides. Shockingly, we got all of those things done with the exception of 1 partial row that still needs to be chinked! The rows that needed to be chinked were lowest priority because those are something that Kenyon could complete on his own in a weekend if necessary.
Work assignments were as follows: Kenyon-chink the downhill wall and do all gable end completion, Sarah-chink all corners and leftover rows, Kenyon's dad-keep making more chinking! Of all the trips we've made back out there, I think this trip was the most work done and hardest physical labor that I have ever done! I basically spent 8 days on ladders ranging from 12 feet to 30 feet on the side of a mountain, lugging buckets of cement up with me. I was exhausted!
Kenyon's uncle helping with sand
Me, pretty much all week
Have to keep going...
The ladder gets awfully wobbly that high and on uneven ground!
Painter's hooks were a huge help on the ladders, so I could have two buckets. Usually the logs weren't so flat and helpful!
We had one day with pretty serious thunderstorms, but we were both working so high up on the house that we were able to keep working tucked under the eaves. It may not have been the safest thing ever, but we lived to tell the tale. The other great part about this trip was that we were able to switch around where we were working to stay out of the sun. It made such a huge difference to just switch to another corner!
The mix master
Kenyon chinking the downhill wall. Luckily, he was able to utilize the scaffolding rather than ladders. He did create his own pulley/supply system with buckets lined up and down the scaffolding for efficiency!
You'd think I could get a Werner ladder sponsorship! You can't tell on the picture as well, but you could see the Werner sticker pretty clearly on each ladder!
Hello, Old Friend!
Putting up the OSB
House wrap
I have to admit, I got a little sidetracked and forgot to take a lot of pictures at this point. Here's the spot I remembered - Kenyon painting the downhill siding.
Usually we pull out late Saturday night (before Sunday early flights) soon after dark. This time we were later than ever, not driving away until 11:11pm! I forgot until about after the sun set to take pictures, so they're not the best!
(Kenyon's dad took this picture the next morning!)
All in all, it was a very successful trip. Once again, we couldn't have done it without the help of Kenyon's dad. My friend, Amy, also came up to "visit" (read: manual labor) all day Saturday. She was a huge help with cleaning up and packing everything away since the three of us were completely exhausted after 8 days of hard work. We also had some great visits with our neighbors and had two different neighbors invite us over for cookouts. They were so accommodating they let us work until dark, let us come over dirty, and then fed us fantastic burgers and steaks and everything you could imagine! We have been so fortunate throughout this process with the help of family, friends, and wonderful neighbors!
Before we got there, our neighbor/contractor framed both gable ends and put all the siding up on the "road" wall gable end. Due to the extreme height, he was not going to be able to do the siding on the "valley/downhill" wall gable end. So, the plan was for Kenyon to work on that (with him) while we were out there. We would rent a forklift and we wanted to get everything done on that gable end to avoid having to rent the forklift again and we weren't sure if we would be able to get back out this summer or not. One thing we learned (unfortunately from experience) is that you cannot count on being able to use the forklift in the fall, winter, or spring because the ground can be too wet!
Items finished before we got there:
Road/Uphill gable end completed, with the exception of paint. The siding will get painted a color similar to the logs.
Road/Uphill gable end completed - view from our new neighbor's house on the other side of the cul-de-sac.
All 1st floor framing -
View of great room from front door.
View of what will be stairs/bathroom wall from front door.
View of master bedroom doorway from front door.
View of kitchen from great room/dining area
View of 1/2 bathroom and laundry room from great room
Look back at master bedroom from great room
Goals
The goals for what we would get done was to complete the downhill gable end, chink all of the corners (on the outside), chink the downhill wall (on the outside), and if possible there were 6 partial rows on the other walls left to chink on a couple different sides. Shockingly, we got all of those things done with the exception of 1 partial row that still needs to be chinked! The rows that needed to be chinked were lowest priority because those are something that Kenyon could complete on his own in a weekend if necessary.
Work assignments were as follows: Kenyon-chink the downhill wall and do all gable end completion, Sarah-chink all corners and leftover rows, Kenyon's dad-keep making more chinking! Of all the trips we've made back out there, I think this trip was the most work done and hardest physical labor that I have ever done! I basically spent 8 days on ladders ranging from 12 feet to 30 feet on the side of a mountain, lugging buckets of cement up with me. I was exhausted!
Kenyon's uncle helping with sand
Me, pretty much all week
Have to keep going...
The ladder gets awfully wobbly that high and on uneven ground!
Painter's hooks were a huge help on the ladders, so I could have two buckets. Usually the logs weren't so flat and helpful!
We had one day with pretty serious thunderstorms, but we were both working so high up on the house that we were able to keep working tucked under the eaves. It may not have been the safest thing ever, but we lived to tell the tale. The other great part about this trip was that we were able to switch around where we were working to stay out of the sun. It made such a huge difference to just switch to another corner!
The mix master
Kenyon chinking the downhill wall. Luckily, he was able to utilize the scaffolding rather than ladders. He did create his own pulley/supply system with buckets lined up and down the scaffolding for efficiency!
You'd think I could get a Werner ladder sponsorship! You can't tell on the picture as well, but you could see the Werner sticker pretty clearly on each ladder!
Hello, Old Friend!
Putting up the OSB
House wrap
I have to admit, I got a little sidetracked and forgot to take a lot of pictures at this point. Here's the spot I remembered - Kenyon painting the downhill siding.
Usually we pull out late Saturday night (before Sunday early flights) soon after dark. This time we were later than ever, not driving away until 11:11pm! I forgot until about after the sun set to take pictures, so they're not the best!
(Kenyon's dad took this picture the next morning!)
All in all, it was a very successful trip. Once again, we couldn't have done it without the help of Kenyon's dad. My friend, Amy, also came up to "visit" (read: manual labor) all day Saturday. She was a huge help with cleaning up and packing everything away since the three of us were completely exhausted after 8 days of hard work. We also had some great visits with our neighbors and had two different neighbors invite us over for cookouts. They were so accommodating they let us work until dark, let us come over dirty, and then fed us fantastic burgers and steaks and everything you could imagine! We have been so fortunate throughout this process with the help of family, friends, and wonderful neighbors!
Sunday, January 18, 2015
Transitions
It’s been awhile since my last post, and by awhile I mean 2 years! We did not fall off the face of the Earth, as it might seem. In an effort to keep my blog in chronological order, to read this in chronological order you’ll need to jump down to the post: Winter 2012/2013.
November 2014 - Quick Visit
Once again I went back to Utah for work for a week in November. This time, I made it up though! Completed since September – second triangle window was installed and the remaining 2nd floor joists had been installed.
View of the second floor from front door – this quarter of the first floor is open to the 2nd floor, which is why the joists end.
Here is that corner that has now dried out. You can see how it’s harder to get these smooth because I can’t get the right tools to fit into the opening. I have some ideas for improvement going forward, we’ll see how that works. You can also see all of the residue that we’ll need to clean up. Around the corners I basically give up on anything other than getting the chinking to stick!
Next: We’re planning on going out for another week in June 2015, more chinking to come…
View of the second floor from front door – this quarter of the first floor is open to the 2nd floor, which is why the joists end.
Here is that corner that has now dried out. You can see how it’s harder to get these smooth because I can’t get the right tools to fit into the opening. I have some ideas for improvement going forward, we’ll see how that works. You can also see all of the residue that we’ll need to clean up. Around the corners I basically give up on anything other than getting the chinking to stick!
Next: We’re planning on going out for another week in June 2015, more chinking to come…
August/September 2014 - Still Chinking...
Still needing a lot finished, Kenyon and I went out (without kids) over Labor Day weekend. A lot had happened since we’d been gone: all of the remaining windows installed (with the exception of 1 of the triangle windows in gable end), front door installed, bathroom framed in, most of the second floor joists installed.
View of Family Room from “Front” Door (The front door is really on the side of the house and the kitchen door is the small door on the front of the house.)
View of the bathroom/laundry room (framed in) from front door.
View of master bedroom area from front door.
View of the kitchen area from family room
View of the kitchen/eating area/family room from kitchen door.
Outside of valley wall (sliding door out of family room)
View of the upstairs from loft (valley side) looking out to road side (where bedrooms will be)
View from loft into open area over front door
And more chinking…
When we left in September, there was 1/4th of 3 rows left on the lake side, the front side was finished, the tent side has 2 rows left, and the whole valley side is left. We will also need to touch-up around some of the windows and do most of the corners. It seems like this will take forever!
View of Family Room from “Front” Door (The front door is really on the side of the house and the kitchen door is the small door on the front of the house.)
View of the bathroom/laundry room (framed in) from front door.
View of master bedroom area from front door.
View of the kitchen area from family room
View of the kitchen/eating area/family room from kitchen door.
Outside of valley wall (sliding door out of family room)
View of the upstairs from loft (valley side) looking out to road side (where bedrooms will be)
View from loft into open area over front door
And more chinking…
When we left in September, there was 1/4th of 3 rows left on the lake side, the front side was finished, the tent side has 2 rows left, and the whole valley side is left. We will also need to touch-up around some of the windows and do most of the corners. It seems like this will take forever!
Subscribe to:
Posts (Atom)